Radiant Heaters
Energy Efficient Heating Systems
Dedicated to developing the best energy efficient solutions using the oldest heating source - the sun - as our model.
We are specialised in radiant heaters, infrared heaters, electric heaters and ceiling heating systems.
Radiant and infrared heaters work by heating solid surfaces instead of the air, which gives a gentle and natural heating with a high level of comfort and with energy savings of 25 - 50%.
We offer the following quality products: EnergoStrip, EnergoInfra, EnergoInfra Industry, EnergoCassette and EnergoLine.
EnergoStrip
Lean against a wall on a cold morning once the sun is up and you’lI feel surprising warmth even though the temperature may still be several degrees below zero. That’s because the sun’s rays warm the atmosphere by heating solid objects.
EnergoStrip works on the same principle. This provides a natural, all over, comfortable heat without cold spots or draughts, with energy savings of 25 - 50% in comparison to conventional heating, i.e. hot air. EnergoStrip can be mounted from 2m to 40m ceiling height and is suitable for a wide range of applications such as daycare centres, houses, schools, offices, churches, conservatories, showrooms, warehouses, factories, tennis and sport stadiums etc. EnergoStrip is approved in splash proof IP44 design for wet and dry areas. EnergoStrip is made of white powder coated galvanised sheet steel (except EE42 - uncoated) in three basic models. With one heating element: EE6 and EE10. Two heating elements: EE8, EE12, EE16, EE18-LN, EE20 & EE24-LN. Three heating elements: EE18, EE24, EE30, EE36 & EE42 (Limited). The heater should be fitted to the ceiling, see distance in adjacent table, using the standard ceiling brackets supplied. Energostrips can be suspended at any desired height on wires, chains etc. However for the suspension of triple-element Energostrips we recommend the use of an accessory suspension frame. EnergoStrip has an unique construction which avoids the creation of electro magnetic fields (emission tested by SEMKO). EnergoStrip is approved for fixed installation by an authorised electrician. Cable connections are to a 16 mm² terminal (EE6 and EE10 to a 6mm² teminal) in the junction box at the end of the heater. The junction box has two cable lead-ins. Connection between several heaters is possible. Note! EE18, EE24, EE30, EE36 & EE42 are convertible between 230V and 400V. Heater control is simply carried out with use of our room thermostats. |
EnergoStrip is suitable from 2m to 40m ceiling height, from small bathrooms to large industries. Provides a comfortable and pleasant warmth including warm floors. The system is simple and inexpensive to install and maintenance free. Because it is ceiling mounted it leaves valuable floor and wall space free. Energy savings range from 25 - 50%. EnergoStrip stores heat in floors and walls with further reductions in energy cost, by using cheaper electricity during the night. Suitable as overall, supplementary and spot heating.
EnergoInfra
EnergoInfra.pdf | |
File Size: | 2291 kb |
File Type: |
Energolnfra is an all-round, supplementary or overall heater for conservatories, balconies, patios and is also effective as a spot/zone heater in workshops, warehouses etc. Energolnfra is approved in splash-proof IP44 design for wet and dry rooms and outdoor installations. For that reason EnergoInfra is suitable also in bathrooms
and utility rooms. Ceiling or wall mounted.
and utility rooms. Ceiling or wall mounted.
Energolnfra is used often as a supplementary heater in conservatories, balconies, patios etc.
It is also suitable for spot and zone heating in workshops and warehouses. It may be fitted in wet and dry areas such as bathrooms and washing rooms.
Energolnfra is constructed of corrosion protected materials which assures a long life span. The casing, heating element, brackets and protective
guards are made of uncoated stainless steel. The reflector is made of high-gloss polished aluminium.
Energolnfra is available in three models, EIR500, EIR1000 & EIR1500 at 230V, see table.
EnergoInfra can be ceiling or wall mounted. The supplied fixing brackets are adjustable and can be angled in different fixed positions. The heater
can also be suspended on wires, chains etc.
The infra heater is approved in splash-proof IP44 design for wet and dry rooms and for outdoor installations.
Energolnfra is approved for fixed installation by an authorised electrician. Cable connections are to a 4mm² terminal in the junction box at the
end of the heater. Connection between several heaters is possible.
Heat control is simply carried out with use of our room thermostats.
ENERGOINFRA industry
energoinfraindustry_eep.pdf | |
File Size: | 535 kb |
File Type: |
Energolnfra Industry provides energy efficient heating for most applications and working environments with high ceiling heights, approximately 3m to 40m. Heat accumulation in floors, walls and other surfaces means that the air temperature can be lowered giving 25 - 50% energy savings and yet achieving the same warmth comfort. Energolnfra Industry, with its high operating temperature, may also be used outdoors, i.e. loading bays etc. The heater is approved in splash-proof IP44 design for wet and dry areas and out-door installations. EnergoInfra EIR4500 & EIR6000 currently only available for 3-phase (400V) installation.
Just like the sun warms the earth, EnergoInfra Industry emits high temperature radiation which warms floors, walls and other surfaces. As a result you can lower the air temperature in the room and yet achieve the same warmth comfort with energy savings of 25 - 50% in comparison to hot air heating.
The high operation temperature makes the Energolnfra Industry especially suited for overall heating of applications with high ceilings, from approx. 4m to 40m. When used for spot heating in draughty working environments, the heater can be mounted from 3m above the floor. It is also suitable for outdoor use, i.e. loading bays, spectator stands etc. Energolnfra Industry is constructed of corrosion protected materials which assures a long life span. The casing and brackets are made of galvanised sheet steel, heating elements of stainless steel. The reflector is made of high-gloss polished aluminium. Energolnfra Industry is available in three models, EIR3000, EIR4500 & EIR6000, see table. The heater has three separate heating elements, 1+1+1, and can be connected to either 230V or 400V (EIR4500 & EIR6000 400V only). It can be ceiling or wall mounted. Supplied fixing brackets are adjustable and can be angled in different fixed positions. The heater can also be suspended on wires, chains etc (not included). Energolnfra Industry is approved in splash-proof IP44 design for wet and dry areas and outdoor installations. Energolnfra Industry is approved for fixed installation by an authorised electrician. Cable connections are to a 16mm² terminal in the junction box at the end of the heater. The junction box has two cable lead-ins. Connection between several heaters is possible. Heater control is simply carried out with use of our room thermostats and/or a 3-step switch. . |
Energocassette
EnergoCassette.pdf | |
File Size: | 1310 kb |
File Type: |
EnergoCassette can be used in false ceilings or fitted directly onto the ceiling with supplied brackets. The heater is suitable for installation up to approximately 4m ceiling height. It has a low surface temperature, no greater than 100°C and emits a gentle and comfortable heat. EnergoCassette is approved in spray-safe IP55 design for wet, dry and fire hazard areas. Suitable for a wide range of installations from schools to stables. Frees valuable wall and floor surfaces with energy savings of 15 - 30%.
EnergoCassette ceiling heating system is the most natural and comfortable way to heat your premises. EnergoCassette gently radiates, low temperature heat to floors, walls and objects in the room, just as the sun heats the earth. As a result you can lower the air temperature in the room and yet achieve the same warmth & comfort with energy savings of 15 - 30%.
The low surface temperature of the EnergoCassette makes it especially suitable for low ceiling heights and it may be fitted up to approximately 4m. The stylish and elegant design therefore suits projects like offices, schools, showrooms, hospitals, houses etc.
With the approval of spray-safe IP55 design for wet, dry and fire hazard areas, it may be used in shower areas and the agriculture and pulp industries etc.
EnergoCassette is an universal model, designed for fitting flush into a false ceiling (T-Bar, 15-24mm) or fitted directly onto the ceiling with supplied ceiling fixing brackets.
As it is ceiling mounted it frees valuable wall and floor space. Furthermore it is safely away from contact and damage which is an advantage for use in public places.
EnergoCassette is made of galvanised sheet steel and comes as standard in white powder coated finish, RAL9016. It is available in two sizes and outputs at 230V, see table.
EnergoCassette is approved for fixed installation by an authorised electrician. Cable connections are to a 4mm² terminal in the junction box on top of the heater. Connection between several heaters is possible.
Heat control is simply carried out with use of our room thermostats.
Energoline
EnergoLine.pdf | |
File Size: | 2181 kb |
File Type: |
EnergoLine may be fitted underneath benches and pews in churches, waiting rooms, halls, sports-halls, spectator stands etc. When ceiling mounted it has a range up to 3m to the floor. The elegant slimline heater provides a comfortable and gentle heat while being unobtrusive and aesthetically blending into the surroundings. EnergoLine is approved in splash-proof IP44 design for wet and dry areas.
EnergoLine is a slimline, 3.5cm thick, low temperature heating panel which mainly emits radiant heat. It has been developed especially as a bench heater but can also be fitted as a ceiling heater.
As a bench heater it may be fitted underneath benches in churches, waiting rooms, halls, sports/leisure-halls etc. It warms the bench as well as the floor directly underneath. This is a particularly good method to warm specific areas where large air volumes are present which do not need to be heated.
The bench heater has a rapid heat-up time with comfortable heat directed to where you want it, with good economy and low energy consumption as a result.
As a ceiling heater it is suited to smaller spaces with low ceiling heights up to 3m. It can be ceiling or wall mounted. Effectively it replaces heat Iosses and down draught. It achieves high warmth comfort and energy savings of 15 - 25% in comparison to conventional heating systems.
The thin and elegant design blends in well with the environment and when ceiling mounted it frees valuable wall and floor space. Furthermore it is safe from contact and damage which is an advantage in public places.
EnergoLine is made of galvanised sheet steel and comes as standard in white powder coated finish. It is available in two sizes and outputs at 230V, see table.
EnergoLine is approved in splash-proof IP44 design for wet and dry areas.
EnergoLine is approved for fixed installation by an authorised electrician. Cable connections are to a 4mm² terminal in the junction box on top of the heater. Connection between several heaters is possible.
Heat control is carried out simply with the use of our room thermostats.